Créer mon blog M'identifier

Cnsupepower Guide Quick Log Splitter Safety Tips

Le 14 avril 2017, 03:24 dans Humeurs 0

Cnsupepower Guide: To avoid squashing a finger, cutting yourself, or worse:

Understand The Type of Wood You're Working With. Certain types of wood react differently as they are split. Always place your hands on the sides on the log, not on the ends, before placing the wood inside the log splitter. If you get into wood that isn't straight grained or has crotches, be prepared for it to split irregularly - whether that is at an angle, a big chunk come out the side, the log turns sideways, etc. Identify any out of the ordinary pieces of wood and then continue with caution.

Only Work When You Are Well Rested and Alert. With any equipment, you must be fully aware and alert of your surrounds. With log splitting, as with other machinery, there's no do overs! If you start getting overly tired, find yourself "resting" your hands wrong on the log, or getting sloppy with your work, stop. Stop right then and go do something else.

Avoid Unnecessary Back Aches. The most common injury when using a log splitter comes from lifting rounds. Bending over and over again to lift a heavy load can quickly strain your lower back. The Split Second is also the only log splitter that adjusts to your height; raising 27" to 34" to not only keep you safe, but comfortable. Try to work with equipment that is customizable to your needs and comfort.

Work Properly When You Are Part of A Team. Never allow more than one person at a time to use the log splitter. The same person should both load and operate the log splitter. When you are working with a team, be especially aware of your surroundings and what others are doing as you are splitting.

Wear The Right Clothing. Always wear safety glasses or goggles while using the log splitter. Never wear loose fitting clothing or jewelry, instead wear snug fitting, comfortable clothes and gloves during splitter operation. On the same note, never operate barefoot or while wearing sandals. Always wear protective shoes with non-skid soles.

Read Your Equipment Owner's Manual. As always, your Performance Built Log Splitter owner's manual will outline everything you need to operate your machinery safely. Don't disregard the safety recommendations.

Performance Built Log Splitter actuality at cnsuperpower

Le 11 avril 2017, 10:13 dans Humeurs 0

Kinetic technology is the beachcomber of the approaching if it comes to log splitting. Instead of application hydraulics as a lot of log splitters do, active Performance Built Log Splitter use a ample flywheel arrangement that food activity from the engine in spinning flywheels, absolution it in one access to pop through logs with almanac speed. No cat-and-mouse for the ram to boring columnist its way through a log, and afresh agilely abjure itself. Actuality are some absurd facts about active log splitters:

1. Their abounding aeon time is as little as 2.5 seconds. How continued is the aeon time on your hydraulic splitter? It's apparently about in the 15- to 30-second range. Those abnormal add up if you're agreeable bond afterwards cord. With a active log splitter, you can apprehend a aeon time of 2.5 to 3 seconds, including auto-retract. This makes them about 6 times faster than a lot of hydraulic models.

2. They aren't abstinent in agreement of tonnage. If you go arcade for a new log splitter, the aboriginal affair you apparently attending for is tonnage. It makes sense; in hydraulic splitters, it's the best way to appraise their power. Active log splitters can't be accurately abstinent in agreement of bags because the force they aftermath comes in one quick thrust, instead of a abiding push. So actuality at cnsuperpower, we acquaint you what hydraulic burden our active log splitters could outsplit. For example, the cnsuperpower active splitter can out breach a 34-ton hydraulic.

3. They're easier to maintain. With no hydraulic oil or pumps, active log splitters are abundant easier to advance than hydraulic units. No adulterated valves, no blowzy oil. The alone aliment a active splitter needs is an engine action now and then, just like any added section of machinery. And electric-powered models don't even charge that!

4. Yes, they can handle boxy logs. Active log splitters can handle any blazon of Log Splitter that a hydraulic archetypal can. Knotty ones, boxy ones, you name it. They accept the adeptness to pop through even arduous logs at a clip that you just will not believe!

Forest King Log Splitter is much more environmentally friendly

Le 7 avril 2017, 03:32 dans Humeurs 0

There is an ever increasing demand for cheaper methods of heating the home over the last few years as the cost of oil and gas climbs higher and higher. This has increased the popularity of wood burners and open fires and, of course, burning Forest King Log Splitter is much more environmentally friendly so we can save the polar bears.

As a result the log splitter is becoming an essential machine for those households that have these installed in their homes.

Now it is all very well doing the macho thing with an axe to show off the bulging, gleaming muscles, but it’s not that safe, especially for those of us who are accident prone and would end up burying an axe in their foot! So using a log splitter is the easy and safest option to split timber.

There is an array of machinery to choose from and the following should help you in making the correct choice for what you need for your circumstances and at the right price bracket. Most machines are mains electric but as they get more powerful and are asked to split heavier material, petrol engines are used to power the units. All machines, whether petrol or electric, have to be operated by both hands so that even idiots cannot get their fingers trapped between the ram and the timber. The way these machines work is that the timber is positioned on the machine between a V shaped metal plate and the ram, which is a moveable arm operated hydraulically so that when the machine is started, this arm moves along the bed of the splitter forcing the timber onto the V shaped plate and splits it. Most machines have this V shape but some have a multi-directional splitting ability (cnsuperpower), so you won’t have to split the log over and over again.

With some machines the ram is adjustable, which does save a lot of time, as it can be adjusted so that it doesn’t have to travel so far on the bed of the machine. Very handy if time is of the essence. All these little benefits are explained in the description of the log splitters, so please study the specifications carefully to make the right choice.

It is also better to burn Log Splitter once they have been split and weathered outside as burning wet timber is annoying and wasteful. To weather your logs they should be left outside exposed to the sun and wind for at least six months and not stacked in a big pile as you will not get the airflow that is needed to weather them. Stack carefully making sure that they are in sunlight and that the wind can blow through and remove the moisture from the timber. If it makes you feel better to cover the top of the stack, do it, but I personally don’t like chasing tarpaulins across the county that have blown off! Ideal time is to split and stack early spring so that it is ready for October time.

Voir la suite ≫